Skip to main content
Version: Next

Test a Cluster

warning

The charon alpha test command is in an alpha state and is subject to change until it is made available as charon test in a future version.

Charon test commands are designed to help you evaluate the performance and readiness of your candidate cluster. It allows you to test your connection to other Charon peers, the performance of your beacon node(s), and the readiness of your validator client. It prints a performance report to the standard output (which can be omitted by with the --quiet flag) and a machine-readable TOML format of the report if the --output-toml flag is set.

Test your connection to peers​

Run tests towards other Charon peers to evaluate the effectiveness of a potential cluster setup. The command sets up a libp2p node, similarly to what Charon normally does. This test command has to be running simultaneously with the other peers. After the node is up it waits for other peers to get their nodes up and running, retrying the connection every 3 seconds. The libp2p node connects to relays (configurable with p2p-relays flag) and to other libp2p nodes via TCP. Other peer nodes are discoverable by using their ENRs. Note that for a peer to be successfully discovered, it needs to be connected to the same relay. After completion of the test suite the libp2p node stays alive (duration configurable with keep-alive flag) for other peers to continue testing against it. The node can be forcefully stopped as well.

To be able to establish direct connection, you have to ensure:

  • Your machine is publicly accessible on the internet or at least a specific port is.
  • You add flag p2p-tcp-address (i.e.: 127.0.0.1:9001) flag and the port specified in it is free and publicly accessible.
  • You add the flag p2p-external-ip (i.e.: 8.8.8.8) and specify your public ip.

If all points are satisfied by you and the other peers, you should be able to establish a direct TCP connection between each other. Note that a relay is still required, as it is used for peer discovery.

Pre-requisites​

  • Create an ENR.
  • Share your ENR with the other peers which will test with you.
  • Obtain the ENRs of the other peers with which you will test.

Run​

charon alpha test peers \
  --enrs="enr:-HW4QNDXi9MzdH9Af65g20jDfelAJ0kJhclitkYYgFziYHXhRFF6JyB_CnVnimB7VxKBGBSkHbmy-Tu8BJq8JQkfptiAgmlkgnY0iXNlY3AyNTZrMaEDBVt5pk6x0A2fjth25pjLOEE9DpqCG-BCYyvutY04TZ,enr:-HW4QO2vefLueTBEUGly5hkcpL7NWdMKWx7Nuy9f7z6XZInCbFAc0IZj6bsnmj-Wi4ElS6jNa0Mge5Rkc2WGTVemas2AgmlkgnY0iXNlY3AyNTZrMaECR9SmYQ_1HRgJmNxvh_ER2Sxx78HgKKgKaOkCROYwaDY"

Run with Docker​

docker run -v /Users/obol/charon/.charon:/opt/charon/.charon obolnetwork/charon:v1.0.0 alpha test peers \
  --enrs="enr:-HW4QNDXi9MzdH9Af65g20jDfelAJ0kJhclitkYYgFziYHXhRFF6JyB_CnVnimB7VxKBGBSkHbmy-Tu8BJq8JQkfptiAgmlkgnY0iXNlY3AyNTZrMaEDBVt5pk6x0A2fjth25pjLOEE9DpqCG-BCYyvutY04TZs,enr:-HW4QO2vefLueTBEUGly5hkcpL7NWdMKWx7Nuy9f7z6XZInCbFAc0IZj6bsnmj-Wi4ElS6jNa0Mge5Rkc2WGTVemas2AgmlkgnY0iXNlY3AyNTZrMaECR9SmYQ_1HRgJmNxvh_ER2Sxx78HgKKgKaOkCROYwaDY"

Test your beacon node​

Run tests towards your beacon node(s), to evaluate its effectiveness for a Distributed Validator cluster.

Pre-requisites​

  • Running beacon node(s) towards which tests will be executed.

Run​

charon alpha test beacon \
  --endpoints="https://ethereum-holesky-beacon-api.publicnode.com,https://ethereum-sepolia-beacon-api.publicnode.com"

Run with Docker​

docker run obolnetwork/charon:v1.0.0 alpha test beacon \
  --endpoints="https://ethereum-holesky-beacon-api.publicnode.com,https://ethereum-sepolia-beacon-api.publicnode.com"